Mega System Tech NET101 Manuel de l'opérateur télécharger pdf (Page 174)

Front turn signal lamp bulb

X

Removing: Turn bulb socket ;

counterclockwise by a quarter of turn and

pull it out of the headlamp housing.

X

Press gently onto the bulb and turn it

counterclockwise.

X

Pull the bulb out of bulb socket ;.

X

Installing: Insert the new bulb into bulb

socket ;.

X

Press gently onto the bulb and turn it

clockwise.

X

Insert bulb socket ; into the headlamp

housing.

The arrow on bulb socket ; must be in

line with the line on the headlamp

housing.

X

Turn bulb socket ; clockwise by a

quarter of turn.

Side turn signal lamp bulb

X

Removing: Open the door on the

corresponding side.

X

Press on retaining lug : in the

direction of the arrow until the side turn

signal lamp housing disengages.

X

Use a suitable tool to loosen the side turn

signal lamp housing from the fender.

X

Turn the bulb socket counterclockwise

and pull it out of the side turn signal

lamp housing.

X

Pull the bulb out of the bulb socket.

X

Installing: Insert the new bulb into the

bulb socket.

X

Insert the bulb socket into the side turn

signal lamp housing and turn the bulb

socket clockwise.

X

Fit the side turn signal lamp housing

onto the fender.

X

Press gently onto the side turn signal

lamp housing.

The side turn signal lamp housing must

audibly engage.

Replacing bulbs for rear lamps

Before you start to replace a bulb for a rear

lamp, do the following first:

X

Turn exterior lamp switch to position

$ (Y page 66).

X

Switch off the ignition.

Tail lamp unit

X

Removing:

Coupé: Open the upper tailgate.

X

Open the lower tailgate.

X

Cabriolet: Open the rear soft top

(Y page 75).

X

Remove the side cover in the cargo

compartment on the corresponding side.

X

Fold the damping material forward, if

necessary.

172

Replacing bulbs

>> Practical hints.

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 219 220

Commentaires sur ces manuels

Pas de commentaire