Mega System Tech iCV-01b Spécifications télécharger pdf (Page 14)

Brake assessment manual Ver 1.0 Published October 2013 14 (48 pages)

Key to Table 3 on page 13:

* means this test does not need to be done on a road or road-type test facility.

+ means this test can be done with a static brake test machine.

T means a test is required for a particular modification. Refer to Appendix 5 for details of the

tests.

# the tests that apply to Modification 21 are under review.

T5/10 means the test comprises either 5 runs in the MLTM or 10 runs in the LLTM condition.

16a applies to vehicles manufactured prior to the introduction of ADR 31 on 1 January 1977.

16b applies to vehicles manufactured after the introduction of ADR 31 on 1 January 1977.

Note: Although 16a and 16b require the same tests, different speeds apply to most of them.

22a applies to vehicles with a change in tyre/wheel diameter less than 26 mm

22b applies to vehicles not fitted with ABS with a change in tyre/wheel diameter greater than

26 mm.

22c applies to vehicles fitted with ABS with a change in tyre/wheel diameter greater than

26 mm.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Pas de commentaire

Mega System Tech iCV-01b Spécifications Page 14